|
TSI Incorporated designs and manufactures precision instruments used to measure flow, particulate, and other key parameters in environments the world over.
|
| |
 AccuBalance®
and AccuBalance® Plus Air Capture Hoods
TSI's ACCUBALANCE® Air Capture Hoods measure
air volume flowing through registers, diffusers
and grilles. Weighing just seven and a half pounds,
these air capture hoods are easy to carry, lift
and use. Simply hold the ACCUBALANCE up to a diffuser
or grille and read direct supply or exhaust airflow
on the large digital display.
TSI's Model 8371
ACCUBALANCE Air Capture Hood measures the air
volume flowing through registers, diffusers, and
grilles.
Weighing just seven and one half pounds, the ACCUBALANCE
is easy to carry, lift, and use. Simply hold the
ACCUBALANCE up to a diffuser or grill and read direct
airflow of a supply or exhaust on the large digital
display.
Applications include air volume measurements, thermal
comfort, as well as HVAC testing, adjusting and
balancing.
The TSI Model 8375
Accubalance Capture Hood is a multipurpose electronic
air balancing instrument for reading air volume
flow at diffusers, and grilles. It is ideally suited
for commissioning agents, facilities managers, health
and safety specialists, test engineers, and test
and balance professionals. This ultra light weight,
ergonomically designed kit saves time and money
while helping to create a healthy and energy efficient
environment.
Applications include thermal comfort studies, HVAC
testing, adjusting and balancing, as well as air
volume measurements.
Learn More About
TSI's AccuBalance® and AccuBalance® Plus
Air Capture Hoods
AccuBalance®
Air Capture Hood Model 8371
AccuBalance®
Air Capture Hood Model 8375
|
 CA-Calc®
Single Gas Monitors
TSI's Series CA-6000 CA-CALC Single Gas Monitors
are ideal exhaust gas analyzers for residential
to commercial service technicians and safety inspectors
measuring combustion exhaust gases. These exhaust
gas analyzers are used to make direct and ambient
exhaust gas measurements for tuning and preventative.
Plant engineers and maintenance professionals can
check critical exhaust gas concentrations on combustion
systems as part of a program. CA-CALC Single Gas
Monitors are also used for periodic monitoring of
target gases in process and in system maintenance
applications with consequences for exceeding concentration
thresholds.
Series CA-6000 Single Gas Monitors are used on
a large range of combustion systems including furnaces,
boilers, process heaters, gas appliances, and combustion
equipment.
Models are available that measure O2, CO (0-1%),
CO (0-2%), CO (0-8%), NO, NO2 and SO2.
Learn More About
TSI's CA-6000 CA-CALC Single Gas Monitors
CA-6000
CA-CALC Single Gas Monitors
|
 CA-Calc®
Two Gas Combustion Analyzers
TSI's Series CA-6100 CA-CALC Combustion Analyzers
are ideal tools for maintenance technicians and
boiler services professionals to use when monitoring
or performing service on light commercial and residential
systems. These analyzers provide real-time tuning
data, minimizing time spent on service calls when
compared to hand-aspirated analyzers, subjective
"tubes," and "dumbbells."
TSI's CA-CALC has a number of other features help
the boiler technician. Parameters for common fuels
like natural gas and fuel oil are factory-programmed,
while other fuels, like kerosene and wood pellets,
can be user-defined, allowing the CA-CALC to be
used in nearly any application. These rugged flue
gas analyzers feature easy field replacement of
consumable parts, including gas sensors and batteries,
to help ensure the analyzers are readily available
for use. Sensors can be ordered from TSI for field
installation, as indicated by the message displayed
after a calibration check.
Four models of this flue gas analyzer series are
available offering a selection of parameters including,
O2, CO, CO2, stack and ambient temperatures, draft
pressure efficiency, excess air, loss, and lambda.
Learn More About
TSI's CA-6100 CA-CALC Two Gas Monitors
CA-6100
CA-CALC Two Gas Monitors
|
 CA-Calc®
Three Gas Combustion Analyzers
TSI's CA-6203 CA-CALC Combustion Analyzer is a
practical tool for boiler maintenance professionals
who measure flue gases to tune standard burners
and low NOx burners for safe, efficient operation.
Real-time data easily viewed on the extra-large
3-line LCD display. Factory-set fuels and user-defined
fuels provide fast setup and flexibility for use
with common fuels like natural gas to bio-fuels.
The CA-6203 leads the industry in low cost operation
with its field serviceable design. It provides for
easy replacement of consumable components, such
as batteries and the gas sensors, to ensure that
the analyzer readily available for use.
The analyzer is an excellent preventative maintenance
tool to supplement boiler room logs by monitoring
stack gases and temperatures from a printout, data
download or from data saved in the on-board memory.
Limits can be set to trigger a scheduled maintenance
request that can provide operational savings.
The CA-6203 provides O2, CO, CO2, NO, NOx, combustion
temperatures, and flue draft pressure.
Learn More About
TSI's CA-6203 CA-CALC Three Gas Monitors
CA-6203 CA-CALC
Three Gas Monitors
|
 DP-Calc™
Micromanometers
TSI's DP-CALC™ Micromanometers allow you to
easily make differential pressure measurements.
The DP-CALC™ measures static, total, and velocity
pressures as well as pressure drops across filters,
coils, fans, and diffusers.
Each model of the DP-CALC™ combines a lightweight
and durable design with an easy-to-read display.
Advanced models feature volumetric flow rate, temperature,
humidity and data logging.
The Model 8710 DP-CALC™
Micromanometer for industrial hygienists, certification
personnel and HVAC professionals measures pressure,
temperature, humidity, volume and velocity. Innovative
features include an available 16-point velocity
matrix, auto zero and low-flow accuracy for fast,
reliable measurements. The instruments also feature
long battery life, data logging and economical factory
service.
Model 8710 features include variable time constant
modes, density correction and K factor. It also
features automatic calculation on flowrate and automatic
conversion between actual and standard velocity
readings.
The DP-CALC™
5815 micromanometer allows you to easily make
HVAC pressure measurements. These robust instruments
can be used with Pitot probes to measure duct velocity.
The DP-CALC 5815 is a simple to operate, hand held
digital Micromanometer for fast, accurate differential
and static pressure measurements.
The DP-CALC™
5825 micromanometer allows you to easily make
HVAC pressure measurements. These robust instruments
can be used with Pitot probes to measure duct velocity.
The high performance DP-CALC 5825 can calculate
flow and has data logging capabilities.
Learn More About
TSI's DP-CALC™ Micromanometers
DP-CALC™
8170 Micromanometers
DP-CALC™
5815/5825 Micromanometers
|
 IAQ-Calc®
IAQ Meters
TSI's IAQ-CALC™ Meters are outstanding instruments
for investigating and monitoring indoor air quality
(IAQ). The Model 7515 is a cost-effective meter
for carbon dioxide (CO2) measurements. The Model
7535 adds data logging of CO2. The Models 7525 and
7545 simultaneously measure and data log multiple
parameters. The Model 7525 measures CO2, temperature,
humidity, and calculates dew point, wet bulb temperature,
and % outside air. The Model 7545 adds carbon monoxide
(CO).
TSI's IAQ-CALC™ Meters are outstanding instruments
for investigating and monitoring indoor air quality
(IAQ). The Model 7515
is a cost-effective meter for carbon dioxide (CO2)
measurements.
TSI's IAQ-CALC™ Meters are outstanding instruments
for investigating and monitoring indoor air quality
(IAQ). The Models 7525 simultaneously measures and
data logs multiple parameters. The Model
7525 measures CO2, temperature, humidity, and
calculates dew point, wet bulb temperature, and
% outside air.
TSI's IAQ-CALC 7535 Meter is an outstanding instrument
for investigating and monitoring indoor air quality
(IAQ). The 7535 model
is a cost-effective meter for carbon dioxide (CO2)
measurements. The proprietary TSI LogDat2 software
permits easy transfer of data to a computer. Data
can be reviewed on-screen, or downloaded to a computer
for easy report generation. Statistics function
displays average, maximum and minimum values, and
the number of recorded samples.
TSI's 7545 IAQ-CALC Meter is an outstanding instrument
for investigating and monitoring indoor air quality
(IAQ). The 7545 model
simultaneously measures and data logs multiple parameters.
Measurements are CO, CO2, temperature, humidity;
and calculations are dew point, wet bulb temperature,
and % outside air. The proprietary TSI LogDat2 software
permits easy transfer of data to a computer. Data
can be reviewed on-screen, or downloaded to a computer
for easy report generation. Statistics function
displays average, maximum and minimum values, and
the number of recorded samples.
Learn More About
TSI's IAQ-CALC™ Meters
IAQ-CALC™
7515, 7525, 7535, 7545 Meters
|
.jpg) TH-Calc®
Thermohygrometers
TSI's TH-CALC™ Thermohygrometers are excellent
hand-held diagnostic instruments for measuring temperature
and humidity. The meters measure temperature and
humidity, and also calculate dew point. The advanced
model adds data logging, and performs wet bulb temperature
and % outside air calculations.
TH-CALC Meters are ideal for conducting thermal
comfort studies, process controls, HVAC system testing/balancing,
critical environments and agriculture applications.
The TH-Calc Model
7415 Thermohygrometer is an excellent instrument
to accurately measure temperature and humidity.
The TH-Calc™
Model 7425 Thermohygrometer is a diagnostic
instrument with advanced capabilities, such as data
logging, review of statistics and downloading to
a PC using LogDat2™ software (included). Logs
data with time and date stamp. Stores 12,700+ samples
and 100 test IDs. It reliably measures temperature
and humidity. Directly calculates dew point, wet
bulb temperature and % outside air. Easy to read
display shows parameters simultaneously.
Learn More About
TSI's TH-CALC™ Thermohygrometers
TH-CALC™
Thermohygrometers
|
.jpg) VelociCalc®
Air Velocity Meters
These dependable meters measure air velocity and
temperature, calculate flow rate and perform statistical
calculations. Models are available that add a humidity
measurement and perform dew point and wet bulb temperature
calculations.
Professionals have found VelociCalc air velocity
meters to be ideal tools for measuring face velocity
measurements in fume hoods and spray booths, or
for IAQ and ventilation system checks.
The Models 9515 and 9525 are economical choices
for Air Velocity Meters without compromising accuracy
or precision. The Model 9515 features a 40-inch
(101.6-cm) telescoping integrated probe for difficult
to reach measurements. The Model 9525 has a 3-inch
retractable probe, plus is UL listed as intrinsically
safe for use in hazardous locations for Division
1 and 2 in Class I, Groups C and D; Class II, Groups
E F and G; and Class III.
The Models 9535 and 9545 thermal anemometers are
like having multiple instruments for the price of
just one. These meters simultaneously measure and
data log several ventilation parameters using a
single probe with multiple sensors. Both models
measure velocity, temperature and calculate flow.
The Model 9545 also measures relative humidity,
and calculates dew point, and wet bulb temperature.
Models 9535 and 9545 have telescopic straight probes;
Models 9535-A and 9545-A have telescopic articulated
probes.
The VelociCalc®
model 9515 is the economical choice for a digital
Air Velocity Meter, without compromising accuracy
or precision. Professionals find it an ideal tool
for face velocity measurements in fume hoods, spray
booths, or for IAQ and ventilation system checks.
The Model 9515 features a 40-inch (101.6 cm) telescoping
integrated probe for difficult to reach measurements.
Measures temperature also.
The VelociCalc Model
9525 is an intrinsically safe digital Air Velocity
Meter. Ideal for HVAC system performance troubleshooting,
commissioning and plant maintenance.
The VelociCalc®
9535 Air Velocity Meter is like having multiple
meters for the price of just one. This meter simultaneously
measures and data log several ventilation parameters
using a single probe with multiple sensors. Measures
velocity and temperature; and calculates flow. The
9535 model comes with a telescopic straight probe.
The VelociCalc®
9535-A Air Velocity Meter is like having multiple
meters for the price of just one. This meter simultaneously
measures and data log several ventilation parameters
using a single probe with multiple sensors. Measures
velocity and temperature; and calculates flow. The
9535-A model comes with an articulated probe.
The VelociCalc®
Model 9545 Air Velocity Meter is like having
multiple meters-for the price of just one. This
meter simultaneously measure and data log several
ventilation parameters using a single probe with
multiple sensors. Measures velocity, temperature
and calculates flow. The 9545 model has a telescopic
straight probe. Ideal for optimizing HVAC system
performance, commissioning, plant maintenance, critical
environment certification and duct traverses.
The VelociCalc®
Model 9545-A Air Velocity Meter is like having
multiple meters-for the price of just one. This
meter simultaneously measure and data log several
ventilation parameters using a single probe with
multiple sensors. Measures velocity, temperature
and calculates flow. Ideal for optimizing HVAC system
performance, commissioning, plant maintenance, critical
environment certification and duct traverses. The
9545 model has an articulated probe
Learn More About
TSI's VelociCalc Air Velocity
Meters
VelociCalc®
Air Velocity Meters
|
 VelociCalc®
Plus Multi-Function Ventilation Meters
The VelociCalc®
Series 9555 are portable, hand held, Multi-Function
Ventilation Test Instruments. These instruments
are available with or without a differential pressure
sensor and are designed to work with a wide range
of plug-in probes. The probes allow users to make
various measurements by simply plugging in a different
probe that has the features and functions best suited
for a particular application. They are designed
to measure air velocity, temperature, humidity,
CO and CO2. Calculations include air flow, heat
flow, turbulence, wet bulb and dew point temperature.
The VelociCalc®
9555-A Multi-Function Ventilation Meter is a
portable, hand held ventilation test instrument.
This instrument is designed to work with a wide
range of plug-in probes. The probes allow users
to make various measurements by simply plugging
in a different probe that has the features and functions
best suited for a particular application. With the
optional probes, measurements include air velocity,
temperature, humidity, pressure, CO and CO2. Calculations
include air flow, heat flow, turbulence, wet bulb
and dew point temperature.
The VelociCalc®
9555-P Multi-Function Ventilation Meter is a
portable, hand held ventilation test instrument.
This instrument is designed to work with a wide
range of plug-in probes. The probes allow users
to make various measurements by simply plugging
in a different probe that has the features and functions
best suited for a particular application. With the
optional probes, measurements include air velocity,
temperature, humidity, pressure, CO and CO2. Calculations
include air flow, heat flow, turbulence, wet bulb
and dew point temperature.
The VelociCalc®
9555-X Multi-Function Ventilation Meter is a
portable, hand held ventilation test instrument.
This instrument is designed to work with a wide
range of plug-in probes. The probes allow users
to make various measurements by simply plugging
in a different probe that has the features and functions
best suited for a particular application. They are
designed to measure air velocity, temperature, humidity,
CO and CO2. Calculations include air flow, heat
flow, turbulence, wet bulb and dew point temperature.
The probes can be ordered at any time and include
a data sheet with certificate of traceability. When
its time for servicing, only the probe needs to
be returned since all the calibration data is stored
within the probe.
Learn More About
TSI's VelociCalc® 9555-A Multi-Function Ventilation
Meter
VelociCalc
VelociCalc® 9555-A Multi-Function Ventilation
Meter
|
 VelociCalc®
Rotating Vane Anemometers
The VelociCalc® 5725 is a high performance,
yet simple to use, rotating vane anemometer. High
accuracy and reliability make the VelociCalc 5725
the professional's ideal tool for measuring unevenly
distributed or fluctuating flows through heating
and cooling coils, diffusers, grilles, and filters.
It accurately measures air velocity and temperature,
calculates flow rate, performs averaging, and can
determine minimum and maximum readings. Using sweep
mode you can quickly provide one averaged reading
of velocity or volume over a large measurement area.
The large vane head automatically averages velocity
and volume readings. The VelociCalc 5725 includes
variable time constant, sampling and statistics
functions and data logging capability.
Learn More About
TSI's VelociCalc® Rotating
Vane Anemometers
VelociCalc®
Rotating Vane Anemometers
|
|
