|
Industrial Sensors from Heaters, Controls And Sensors feature LevelSonic Ultrasonic Level Sensors, Multipoint Level Sensors, Mini Sonic Ultrasonic Transmitters, CR MAGNETICS Current Sensors, Tranducers, Transformers, Transmitters, EXERGEN Infrared Temperature Sensors and Tower Status Indicator Lights.
 |
The small, compact LevelSonic
Ultrasonic Level Sensors offer non-contact measurement
of liquids and solid levels. The transmitter is two-wire
loop-powered and uses a simple magnetic key to set up the
level range to be measured, as well as selecting the response
rate and default currents. On-board AND visible operating
and fault indication keeps you informed of the operational
and fault status at the transmitter.
|
|
|
Mini
Sonic Ultrasonic Transmitters feature Standard 5 feet
of interconnection cable, Simple push-button calibration,
Output 4- 20 mA / 20- 4 mA, Built-in temperature compensation,
Optional High Level Alarm relay dual pole output 5A/230
Vac, Optional RS485 communications with calibration, diagnostics
and data logging software, PLC compatible, Three Wire Operation.
|
|
|
FuzyPro
“Smart” Radar Explosion Proof Measurement Sensors
- Features: Self Adjusting Tracking Radar, Output 4-20 mA
/ 20- 4mA, Recommended RS232 or RS485, For communications
with calibration, diagnostics & data logging software,
PLC compatible (Modbus RTU),Three Wire Operation.
|
 |
FuzyPro
3 & 4 Wire Self Compensating Ultrasonic Transmitters
- Features: Simple push-button calibration (Accurate),
Output 4-20 mA /20-4 mA (Isolated on 4 Wire Model’s
only), Built-in temperature compensation, Optional RS232
or RS485, Communications with calibration, diagnostics
and data logging software, PLC compatible (Modbus RTU),
Three or Four Wire Operation, Self cleaning operation
of sensor face.
|
 |
FuzyPro
“Mini Sonic” Ultrasonic Transmitters - Features:
Standard 5 feet of interconnection cable, Simple push-button
calibration, Output 4- 20 mA / 20- 4 mA, Built-in temperature
compensation, Optional High Level Alarm relay dual pole
output 5A/230 Vac, Optional RS485 communications with
calibration, diagnostics and data logging software, PLC
compatible, Three Wire Operation.
|
|
|
The FUZYPRO
8080TR is a Digital, PC programmable, galvanicaly isolated
2-wire smart transmitter. The unit converts 13 types of
thermocouple sensors; 12 types of RTD sensors, configured
as 2, 3 and 4 wires; potentiometer, resistor and millivolt
inputs into process current loop. A 24 bit A/D converter
is the heart of this outstanding performance.
|
|
|
These Multipoint
level sensors are ideal for liquids that are corrosive
as all wetted parts are made of stainless. Units can be
made of various materials depending on the environment that
the sensor will be used in.
|
|
|
LB Series Load Break
Switches comply with the latest specifications for
modern low voltage devices.Outstanding electrical characteristics
of LB Switches with compact design, contribute to space
saving installation and operational convenience.
|
 |
Current Sensors,
Tranducers, Transformers, Transmitters
Creative solutions for Current, Voltage, Power and Frequency
monitoring from CR MAGNETICS. |
 |
Infrared
Temperature Sensors
Exergen D-Series Infrared Temperature Sensors are the
only infrared instruments which can be certified as to NIST-tracable
accuracy on real surfaces of unknown emissivity, while completely
free of contact errors and heat sinking errors of contact
devices.
|
 |
Tower
Status Indicator Lights are available in 3 type and
3 sizes of indicating lights. Shown here are the medium
size that are most commonly used. The smallest are about
the size of a 25 cent piece the medium are 52 mm in OD and
the larger ones are 56 mm OD and have a prismed lens for
long range visibility. |
|
