The HAUG charging bar ALS is suitable for most applications where material webs are to be fixed relative to each other. The charging bar ALS can be supplied using a HAUG AG-series charging generator. These are optionally available with positive or negatice polarity. The voltage of the charging generator can be steplessly adjusted.

The charging bar ALS must be attached at a distance of approx. 10–20 mm above the material to be charged, directly above the counter-electrode. The grounded counter-electrode must make contact with the material to be charged.

In order to achieve a continuous, controlled fixation of the two materials, we recommend that, before charging, the materials to be fixed to one another, be discharged using a suitable HAUG ionization system.

Special features and advantages

The charging bar ALS is available both with axial and radial exit of the high-voltage cable. The high-voltage cable and the pin strip can be simply replaced.